In this step experts will show you how to fix the first layer of all walls to the sub-floor. This is a very important step in building Scandi Cabins and Scandi Homes.
Pre-drill the hold down fixings with the 6.5 mm drill for the first fix down screw on the perimeter. Use a Spade Bit to sink the head of the screw.
Important. Make sure you clean out any swarf or any wood dust out of the halls, so boards sit down on top of another.
When screwing the bottom boards to the sub-floor, you want to eliminate any gap between the bottom board and a flooring. On the corners and every meter or so along the bottom board we tie down with the screw to the beam. Screws have to keep the first boards straight and hard down against the bottom.
Expert’s tip: When screwing the first layer of wall boards to the base, make sure you have all 90 degree angles in all corners and the base is level. Check, double check and triple check.
Now the bottom boards are tied down. The next step is to pre-drill the holes in the sub-floor for steel rods and electrical. To see all list of steps, go back to main Builder’s Guide page.